Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Light-duty winch with 1.8-hp, permanent magnet motor lets you quickly and safely pull small vehicles onto your trailer. Compact winch fits easily into most custom boxes and cabinets. Includes hand-held remote and mounting plate with hardware.
Features:
Specs:
This compact, light-duty trailer winch lets you pull ATVs, UTVs, golf carts, and other small vehicles onto your trailer. You can mount the winch directly to your trailer deck or front rail with the included mounting plate. It also fits easily into most custom cabinets or boxes. And it includes a hand-held remote, synthetic rope, hawse fairlead, and a free-spooling clutch.
This winch features a 1.8-horsepower, 12-volt DC motor with 4,400 lbs of line pull. The permanent magnet motor offers the same line-pulling power and speed as a series-wound motor of comparable size, but it's lighter and uses less current. The motor is constructed of durable, corrosion-resistant materials including the powder coated housing, copper battery terminals, and zinc-plated steel hardware.
The contactor - or solenoid - transmits power from the vehicle's battery to the winch motor. The 250-amp contactor - located inside the power unit - is sealed to meet IP67 specifications for water and weather resistance. The copper terminals and zinc-plated hardware are corrosion resistant.
The on/off switch on the back of the power unit lets you shut off the power when you aren't using the winch. There is also a rubber-sealed, weatherproof attachment port on the power unit for the remote control. An integrated rubber cap lets you cover the port when it's not in use.
The free-spool clutch enables you to pull out the rope by hand. This saves battery power, prevents the brake from wearing down prematurely, reduces wear on the motor, and is much faster than waiting for the drum to unroll the rope. To release the clutch for free-spooling simply rotate the handle to the "Freespool" position. To reengage the clutch, rotate the handle back to the "Engaged" position. The clutch positions are indicated by a diagram on the gearbox and are also labeled on the knob.
The clutch is driven by a 3-stage planetary gear train. This provides more speed than traditional worm gear drives or 1- or 2-stage planetary gear trains.
The steel gearbox has a rust-resistant black powder coat finish and is sealed to keep out moisture.
The automatic mechanical brake securely holds a load and prevents unintentional payout (or creep). A large spring coil contracts when the winch is in gear and the drum is winding in. When the winch stops, the load starts to pull and the spring expands to press against the spring chamber. The pressure of the spring on the wall of the spring chamber creates resistance to stop the drum from rotating outward. At maximum pressure the brake holds 100 percent of the load.
The friction created when the spring is pressing against the spring chamber creates heat. That heat is quickly dispersed away from the motor shaft and through the gearbox. This prevents potentially damaging heat buildup near the motor.
The hand-held remote has a 20' lead and in/out rocker switch so you can control your winch from the back of your trailer. The rocker switch is sealed and water resistant so it won't get damaged in wet conditions. Simply plug the durable plastic remote into the power unit when you need to use it, and disconnect it to store it away when you aren't using it.
The wireless remote kit (BDW20212 - sold separately) lets you operate the winch from up to 100' away.
The rope is made of synthetic HMPE fiber that is lightweight yet stronger than steel. This synthetic rope is safer to use than a steel rope because it generates less kinetic energy - and therefore less kickback - if a break occurs. It won't stretch - or creep - over time like steel rope can. And it's also less likely to fray and create sharp strands so it's easier to handle and easier to spool.
The rope winds around a solid steel drum. The mounting flanges are strong enough to resist bending or breaking if the rope wrap becomes uneven and excess stress is put on the drum.
A 6' long woven polyester protective sleeve at the hook end of the rope provides extra protection for your hands. A hand-saver strap is also included to use in conjunction with work gloves (BDW20070 - sold separately) so that you can safely handle the rope and hook.
The removable clevis hook is constructed of high-strength forged alloy steel that is heavy duty and rust resistant. It has a spring-loaded safety latch for quick fastening and removal. The hook attaches to the steel thimble on the end of the synthetic rope.
The compact hawse fairlead is designed for use with synthetic ropes. It helps guide the rope as it's winding in and out, and it has a rounded hole to help prevent wear on the rope. The 3/4" thick fairlead has a silver anodized finish that resists corrosion, and it installs to the mounting plate with zinc-plated hardware.
The winch is constructed of strong, durable materials that are able to withstand any weather condition or terrain. The motor housing and gearbox are made of corrosion-resistant powder coated steel. The contactor is sealed to keep water out, and the power unit is made of heavy-duty yet lightweight plastic. The steel tie bars and side frame drum supports help to create a strong and rigid winch body.
This versatile winch can be mounted to your trailer in several different ways. You can bolt the included plate onto the deck of your trailer and attach the winch and fairlead. Counter-sunk bolt holes in the mounting plate ensure that the hex heads of the included bolts don't protrude above the trailer's flat surface. This is the easiest method and does not require welding, but it does leave a footprint on your deck.
You can mount the plate to the front rail of your trailer. This method elevates the winch so it's easy to reach and frees up valuable space on your deck, but will require welding the plate to the rail. You can also weld the plate to the front frame of the trailer so that the winch sits at at deck level without using up space on the deck.
The compact design allows the winch to easily fit into most custom cabinets or boxes. This method keeps the winch out of the elements and keeps it hidden. Many cabinets and boxes can even be locked to protect the winch from would-be thieves. You can also install a dedicated battery inside or near the cabinet to power the winch. This prevents the winch from putting a strain on your vehicle's battery, and it eliminates the need to run a power lead all the way to the front of your truck.
| Layers of Rope | Capacity (lbs) | Total Rope on Drum (ft) |
|---|---|---|
| 1st Layer | 4,400 | 9 |
| 2nd Layer | 3,770 | 25 |
| 3rd Layer | 3,244 | 40 |
| 4th Layer | 2,847 | 50 |
The line pull capacity of your winch is determined by the maximum load your winch can pull with a single layer of rope on the drum. As more layers of rope are wound onto the drum, pulling the same load requires more force, leading to a loss in winching power. With a 2nd layer of rope around the drum, your line pull capacity is reduced by approximately 14 percent. With 3 layers on the drum, the line pull capacity is reduced by approximately 23 percent, and with 4 layers on the drum it is reduced by approximately 35 percent.
Note: It is recommended that you begin any line pull with a minimum of 5 wraps and a maximum of 2 layers of rope on the drum.
To select the appropriate trailer winch for your application, determine your gross vehicle weight. The GVW is the stand-alone weight of your vehicle plus the weight of any items in and on the vehicle. Once you have determined the GVW of your vehicle, choose a winch with a capacity that is 1-1/2 times your GVW. Using that formula, this winch - with an 4,400-pound capacity - will work for vehicles with an approximate GVW of 2,933 pounds.
| Percent Incline | Rolling Load Capacity (lbs) |
|---|---|
| Level Surface | 44,000 |
| 5 (3°) | 29,348 |
| 10 (6°) | 22,088 |
| 20 (11°) | 14,960 |
| 30 (17°) | 11,484 |
| 50 (26°) | 8,184 |
| 70 (35°) | 6,732 |
| 100 (45°) | 5,676 |
To calculate your winch's rolling load capacity - the amount of weight it can pull up an incline - you must multiply the line pull capacity by a factor determined by the degree of the incline.
The multiplication factors shown in the chart, right, include a 10-percent rolling friction factor.
Note: A 5-percent - or 3-degree - incline is a 1/2' rise over a 10' distance. Follow the chart to determine your winch's rolling load capacity.
Increase the pulling capacity of your winch by doubling up the rope with a pulley block (BDW20028 - sold separately). Secure the pulley block to the vehicle you are pulling with a bow shackle (BDW20020 - sold separately) to provide a strong anchor for your double-line pull. Using double-line operation will approximately double your winch's pulling capacity.
California residents: click here
Average Customer Rating: 4.7 out of 5 stars (131 Customer Reviews)
Light-duty winch with 1.8-hp, permanent magnet motor lets you quickly and safely pull small vehicles onto your trailer. Compact winch fits easily into most custom boxes and cabinets. Includes hand-held remote and mounting plate with hardware.Easy Installation. Needed a little coaxing to free spool at first, but operates fine. Compact and a great application for my Cobra hauler.
I haven't used it much although i am s atisficed
It came with a rope instead of cable and consequently it doesn't spool freely. I have purchased a cable but haven't put it on yet but i believe it was designed for cable.
I would not buy it again because of this.
Thanks!
Excellent product, and transaction. The winch has worked very well since I took it out of the box and is useful for lots of things. I mostly use it to winch my car on a flatbed. I bought a set of extra long copper cables and hook it up directly to the battery in my tow vehicle. Real Easy and Quick set up.
Easy to install and a great addition to my enclosed trailer. Easily pulls up my 1100lb Caterham race car. I have also purchased the wireless remote which makes the whole set up very slick
Pulls my 3,200lb race car in to trailer with ease. Synthetic cable is only way to go. Quality product
The winch works like a dream very quiet when in use pulling 3400 pound car in and out of trailer would purchase it again recommend to other friends
This is a great unit for my needs. Compact and strong to pull up the Hot Rod . Used the hitch receiver and ball mount to have it removable from the trailer, simple and easy to do.
Got everything out of the box, looks exactly what i wanted. Can't wait till i get trailer painted so i can install everything. Order was delivered as stated, couldn't ask for any more professional place to do business, I have them bookmarked so I can go right to them first.
I mounted this inside my enclosed car hauler and I love it. I just wish I would have bought it a year ago!
Great trailer winch and like the synthetic line instead of steel cable. Very nice quality, works great pulling the hot rod (rolling) up on the 18' trailer with zero issues.
excellent service from christopher N. appears to be very well built and in excellent
condition however I have not used it yet. I will order future parts from etrailer
arrived on time
Only thing I didn’t like was that the control is held on by a worm clamp, which if you try to tighten up AFTER it’s bolted down not real easy. Other than that all good.
This winch has performed flawlessly for over 1 year now, it does exactly what I bought it to do, and I would buy another one if I had another need. Thanks
Steve B.
4/3/2020
my winch is still working strong, this is the best winch Ive ever bought.
Winch has worked perfectly. I have used it multiple times and it is never let me down. I would buy it again.
Works great, no problems at all.
All good, no problems, nice winch @ a fair price.
Customer service is great. Delivery was on time. Just a great experience in all very helpful and courteous. Would definitely recommend.
very fast shipping and great service
Do you have a question about this Electric Winch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Victoria B.
10/15/2019
I spoke to my contact at Bulldog Winch about the issue you are having with your free-spooling clutch. They said that they have spoken with a number of customers who have had a hard time pulling out their rope or cable the first time. After one or two times of pulling the rope or cable all of the way out and winching it back in, the free-spooling clutch is much easier to use.